 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
4.
TAG AND DISCONNECT THREE POWER AND
THREE GROUND CONNECTORS (4) FROM
SHIFT TOWER JUMPER HARNESS (5).
5.
DISCONNECT
SHIFT
TOWER
JUMPER
HARNESS
POWER
AND
GROUND
CONNECTORS (6) FROM CAB HARNESS (7)
AND REMOVE JUMPER HARNESS (5) FROM
SHIFT TOWER (3)
6.
REMOVE GROMMET (8) AND CAB HARNESS
(7) FROM SHIFT TOWER (3).
NOTE
To ease installation, note mounting position of cable pivot pins and hold-down
clamps prior to disconnecting cables.
7.
PLACE TRANSMISSION SELECTOR LEVER IN "D" POSITION
8.
TAG TRANSMISSION SHIFT CABLE (9).
9.
REMOVE TWO NUTS (10), TWO LOCK WASHERS (11), TWO SCREWS (12), CLAMP (13), AND SPACER (14)
FROM BRACKET (15). DISCARD LOCK WASHERS.
10.
REMOVE RETAINING PIN (16) FROM PIVOT PIN (17) AND PIVOT PIN FROM BRACKET (18).
Change 3 4-366.5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals