TRANSMISSION SHIFT LINKAGE ADJUSTMENT

TM 9-2320-363-20-2

TRNSMISSION SHIFT LINKAGE ADJUSTMENT

This task covers: Adjustment

INITIAL SETUP

Personnel Required: (2)

Tools and Special Equipment:

Shop Equipment, SC 4910-95-CL-A72

Tool Kit, SC 5180-90-CL-N26

ADJUSTMENT

PLACE TRANSMISSION SELECTOR LEVER (1) IN 3RD GEAR POSITION.

LOOSEN TWO NUTS (2) ENOUGH TO ALLOW CABLE ASSEMBLY (3) TO BE MOVED BACK AND

FORTH.

MOVE CABLE ASSEMBLY (3) TO ACHIEVE MEASUREMENT OF 6.625 IN. BETWEEN CENTER OF

U-CLAMP (4) AND CENTER OF SHIFT LEVER (5).

W O NUTS (2).

TIGHTEN

MOVE SH IFT LEVER (1) TO EACH POSITION AND CHECK THAT BARREL NUT (6) MOVES

FREELY.

NOTE

After performing step 6, if barrel nut will not move freely, notify direct support to

r e p l a c e cable.

IF BARREL NUT (6) DOES NOT MOVE FREELY, REPEAT STEPS 1 THRU 4 AND CHECK AGAIN.