STOP/TAIL/BACKUP LIGHTS AND ALARM/BACKUP/TAILLIGHTS WIRING HARNESS REPLACEMENT

TM 9-2320-363-20-2

STOP/TAIL/BACKUP LIGHTS AND ALARM/BACKUP/TAILLIGHTS WIRING HARNESS REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

INITIAL SETUP

Tools and Special Equipment:

Equipment Condition:

Tool Kit, SC 5180-90-CL-N26

Reference

Conditi on Description

Page 2-29

Batteries Disconnected

REMOVAL

NOTE

Wiring harness and leads are secured in place by clips, wire ties, cushion

clamps, and screw terminals.

Only remove hardware securing harness or lead to be removed.

REMOVE AND DISCON NECT STOP/TAIL/BACKUP LIGHTS AND ALARM/BACKUP/TAILLIGHTS WIRING

HARNESS USING ILLUSTRATION AND TABLE AS A GUIDE.

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.

INSTALLATION

NOTE

Wiring harness and leads are secured in place by clips, wire ties, cushion

clamps, and screw terminals.

Make sure harness is secure and all hardware is tight.

INSTALL AND CONNECT STOP/TAIL/BACKUP LIGHTS AND ALARM/BACKUP/TAILLIGHTS WIRING HARNESS

USING ILLUSTRATION AND TABLE AS A GUIDE.

NOTE

Follow-on Maintenance:

Connect batteries (page 2-29).

4-333.12 Change 3