SHIFT TOWER JUMPER HARNESS REPLACEMENT

TM 9-2320-363-20-2

SHIFT TOWER JUMPER HARNESS REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP

Applicable Configuration:

References:

All except M915A2 and M916A1

TM 9-2320-363-10

Tools and Special Equipment:

Equipment Condition:

Tool Kit, SC 5180-90-CL-N26

Reference

Condition Description

Materials/Parts:

Page 2-29Batteries Disconnected

Tags, Identification

REMOVAL

NOTE

This task can be used to replace either jumper harness (power or ground)

located within the shift tower.

M916A2 jumper harnesses have three leads each and the M917A1/M917A1

w/MCS have four leads each.

REMOVE SIX SCREWS (1) AND REAR ACCESS

COVER (2) FROM SHIFT TOWER (3).

DISCONNECT JUMPER HARNESS LEADS (4) FROM SHIFT TOWER LIGHT LEADS (5).

DISCONNECT JUMPER HARNESS LEAD (6) FROM VEHICLE HARNESS LEAD (7) AND REMOVE JUMPER

HARNESS (8) FROM SHIFT TOWER.

4-333.10 Change 3