LEFT - HAND SWITCH PANEL REPLACEMENT

TM9-2320-363-20-2

L E F T - H A N D SWITCH PANEL REPLACEMENT

This task covers:

a. Removal b. Cleaning/Inspection c. Installation

INITIAL SETUP

Equipment Condition:

Tools and Special Equipment:

Shop Equipment, SC 4910-95-CL-A72

Reference

Condition Description

Tool Kit, SC 5180-90-CL-N26

Page 2-29

Batteries Disconnected

Materials/Parts:

Washer, Lock (2)

REMOVAL

REMOVE FOUR SCREWS (1) AND PULL PANEL (2) OUT OF DASHBOARD.

NOTE

Tag connectors prior to removal to aid in installation.

DISCONNECT PLUG (3) AND THREE CONNECTORS (4) AND REMOVE FOUR FIBER OPTIC

LABELS (5), FOUR LABEL HOLDERS (6), AND PANEL (2).

REMOVE THREE SCREWS (7), PIGTAIL (8), TWO NUTS (9), TWO WASHERS (10), AND PIGTAIL

(11) FROM BACK OF PANEL (2).

REMOVE TWO SCREWS (12), TWO LOCK WASHERS (13), AND PIGTAIL (14). DISCARD LOCK

WASHERS.

REMOVE BOOT (15), FOUR NUTS (1 6), AND FOUR SWITCHES (17) FROM PANEL (2).

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.

lNSTALLATION

INSTALL FOUR SWITCHES (17), FOUR NUTS (16), AND BOOT (15).

INSTALL PIGTAIL (14), TWO NEW LOCK WASHERS (13), AND TWO SCREWS (12).