 |
|||
|
|
|||
|
Page Title:
CENTER GAGE PANEL AND LAMPS REPLACEMENT |
|
||
| ||||||||||
|
|
 TM9-2320-363-20-2
C E N T E R GAGE PANEL AND LAMPS REPLACEMENT
This task covers:
a. Removal b. Cleaning/Inspection c. Installation
INITIAL
SETUP
Equipment Condition:
Applicable Configuration:
M916A1
Condition Description
Reference
Batteries Disconnected
Page 2-29
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A72
Tool Kit, SC 5180-90-CL-N26
REMOVAL
1.
REMOVE FOUR SCREWS (1) AND PULL PANEL ASSEMBLY (2) AWAY FROM DASHBOARD.
NOTE
T a g all plugs, connectors, and g a g e s prior to removal to aid in installation.
2.
DISCONNECT THREE PLUGS (3) AND TWO CONNECTORS (4) AND REMOVE PANEL ASSEMBLY
(2).
REMOVE FOUR LAMP HOLDERS (5) FROM FOUR GAGES (6, 7, 8, AND 9).
3.
4.
TURN FOUR LAMPS (10) TO LEFT AND REMOVE FROM FOUR LAMP HOLDERS (5).
REMOVE THREE NUTS (11) AND HARNESS (12) FROM GAGE (9).
5.
6.
REMOVE TWO `NUTS (13), TWO WASHERS (14), BRACKET (15), AND GAGE (9) FROM PANEL (2).
7.
REPEAT STEP 6 FOR THREE GAGES (6, 7, AND 8).
CLEANING/lNSPECTION
Clean and inspect all parts in accordance with Chapter 2.
INSTALLATION
1.
INSTALL GAGE (9), BRACKET (15), TWO WASHERS (14), AND TWO NUTS (13) ON PANEL (2).
2.
REPEAT STEP 1 FOR THREE GAGES (6, 7, AND 8).
INSTALL HARNESS (12) AND THREE NUTS (11) ON GAGE (9).
3.
4.
INSTALL FOUR LAMPS (10) IN FOUR LAMP HOLDERS (5) AND TURN TO RIGHT.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals