 |
|||
|
|
|||
|
Page Title:
RIGHT GAGE PANEL AND LAMPS REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-363-20-2
RIGHT GAGE PANEL AND LAMPS REPLACEMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Applicable Configuration:
Materials/Parts:
All except M915A2 and M916A1
Nut, Lock (4)
Tags, Identification Appendix C, Item 26
Tools and Special Equipment:
Equipment Condition:
Shop Equipment, SC 4910-95-CL-A72
Tool Kit, SC 5180-90-CL-N26
Reference
Condition Description
Page 2-28
Air System Drained
Page 2-29
Batteries Disconnected
REMOVAL
1.
REMOVE FOUR SCREWS (1) AND PULL PANEL (2) AWAY FROM DASHBOARD.
NOTE
Tag all air tubes, connectors, and gages prior to removal to aid in installation.
2.
DISCONNECT CONNECTOR (3) FROM CAB WIRING HARNESS CONNECTOR (4).
3.
DISCONNECT CONNECTORS (5) FROM FUEL LEVEL GAGE (6), TRANSMISSION OIL TEMPERATURE GAGE
(7), AND TRANSFER CASE OIL TEMPERATURE GAGE (8).
4.
DISCONNECT TWO TUBES (9) FROM AIR PRE SSURE GAGES (10).
DISCONNECT TUBE (11) FROM AIR
CLEANER RESTRICTION INDICATOR GAGE (12).
5.
REMOVE PANEL (2) FROM DASHBOARD.
6.
REMOVE LAMP HOLDERS (13) FROM FUEL LEVEL GAGE (6), TRANSMISSION OIL TEMPERATURE GAGE
(7), TRANSFER CASE OIL TEMPERATURE GAGE (8), AND TWO AIR PRESSURE GAGES (10).
7.
REMOVE FOUR LOCK NUTS (14), GROUND WIRE (15), TWO BRACKETS (16), AND AIR PRESSURE GAGES
(10) FROM PANEL (2). DISCARD LOCK NUTS.
8.
REMOVE SIX NUTS (17), WASHERS (18), THREE BRACKETS (19), FUEL LEVEL GAGE (6), TRANSMISSION
OIL TEMPERATURE GAGE (7), AND TRANSFER CASE OIL TEMPERATURE GAGE (8) FROM PANEL (2).
9.
REMOVE TWO SCREWS (20) AND AIR CLEANER RESTRICTION INDICATOR GAGE (12) FROM PANEL (2).
10.
TURN FIVE LAMPS (21) TO LEFT AND REMOVE FROM LAMP HOLDERS (13).
4-171.0 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals