 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
1.
IF REMOVED, INSTALL SPACER (1), ADJUSTING ROD (2), WASHER (3), AND CAPSCREW (4) ON GEAR
CASE COVER (5).
2.
INSTALL ADJUSTING NUT (6) ON ADJUSTING ROD (2).
3.
PLACE ALTERNATOR PULLEY (7) IN SOFT-JAWED VISE AND INSTALL ALTERNATOR PULLEY (7), KEY (8),
AND NEW LOCK NUT (9) ON ALTERNATOR (10). REMOVE SOFT-JAWED VISE.
NOTE
Do not tighten two capscrews (11 and 12) until drivebelt tension adjustment has been performed.
4.
INSTALL ADJUSTING LUG (13), WASHER (14), AND CAPSCREW (11) ON ALTERNATOR (10).
5.
INSTALL ALTERNATOR (10) ON ADJUSTING ROD (2) AND ALTERNATOR BRACKET (15).
6.
INSTALL TWO WASHERS (16), STA NDOFF BRACKET (17), CAPSCREW (12), AND NEW LOCK NUT (18) ON
ALTERNATOR BRACKET (15).
7.
INSTALL NUT (19) ON ADJUSTING ROD (2).
CAUTION
Do not pry or twist drivebelt or damage to drivebelt may occur.
8.
BACK OFF ADJUSTING NUT (6) AND INSTALL DRIVEBELT (2 0) ON ALTERNATOR PULLEY (7).
9.
ADJUST DRIVEBELT (20) TENSION (PAGE 4-154).
10.
TIGHTEN TWO CAPSCREWS (11 AND 12).
11.
INSTALL NINE ELECTRICAL WIRES (21), FOUR WASHERS (22), AND FOUR NUTS (23) ON ALTERNATOR
(10).
NOTE
Follow-on Maintenance:
Connect ba tteries (page 2-29).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals