 |
|||
|
|
|||
|
Page Title:
FAN CLUTCH AND DRIVE PULLEY REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-363-20-2
FAN CLUTCH AND DRIVE PULLEY REPLACEMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Equipment Condition:
Tools and Special Equipment:
Reference
Condition Description
Tool Kit, SC 5180-90-CL-N26
Fan Impeller and Shroud
Removed
Fan Belts Removed
REMOVAL
1
ON M915A2 AND M916A1, REMOVE CONNECTOR (1) FROM FAN CLUTCH (2).
2.
ON ALL EXCEPT M915A2 AND M916A1, REMOVE CONNECTOR (1) FROM SPINDLE AND HOUSING
ASSEMBLY BEHIND DRIVE PULLEY (3).
NOTE
If screw holes are not alined, perform step 3.
3.
APPLY AIR PRESSURE TO FAN CLUTCH (2) (M915A2 AND M916A1) OR SPINDLE AND HOUSING
ASSEMBLY (ALL EXCEPT M915A2 AND M916A1) TO ALINE SCREW HOLES.
4.
REMOVE SIX SCREWS (4), FAN CLUTCH (2), PILOT SPACER (5), AND DRIVE PULLEY (3).
* M915A2/M916A1
CONFIGURATION
SHOWN
4-126 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals