 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
CYLINDER HEAD FUEL LINES AND FITTINGS REPLACEMENT (CONT)
CLEANING/INSPECTION
Clean and inspect all parts in accordance with Chapter 2.
INSTALLATION
WARNING
Diesel fuel is flammable. Do not work on fuel system in presence of sparks or open
flame. To do so could result in serious injury to personnel.
1.
INSTALL FUEL HOSE (1) ON CHECK VALVE (2).
2.
INSTALL CLAMP (3) AND SCREW (4) ON ENGINE BLOCK (5).
3.
COAT THREADS WITH PIPE SEALING COMPOUND AND INSTALL ELBOW (6) IN CYLINDER HEAD (7).
4.
CONNECT FUEL HOSE (1) TO ELBOW (6).
5.
COAT THREADS WITH PIPE SEALING COMPOUND AND INSTALL SPECIAL ELBOW (8) IN CYLINDER HEAD
(7).
6.
INSTALL CHECK VALVE (9) ON FUEL HOSE (10).
7.
INSTALL FUEL HOSE (10) ON SPECIAL ELBOW (8).
8.
INSTALL FUEL HOSE (11) ON CHECK VALVE (9).
9.
INSTA LL CLAMP (12), CLAMP (13), WASHER (14), SCREW (15), AND NEW LOCK NUT (16) ON
TRANSMISSION DIPSTICK TUBE (17) AS SHOWN.
10.
CONNECT FUEL HOSE (11) TO FUEL TANK ASSEMBLY (18).
4-43.2 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals