CYLINDER HEAD FUEL LINES AND FITTINGS REPLACEMENT -699580086

TM 9-2320-363-20-2

CYLINDER HEAD FUEL LINES AND FITTINGS REPLACEMENT

This task covers:

a. Removal

b. Cleaning/inspection

c. Installation

INITIAL SETUP

Applicable Configuration:

Equipment Condition:

All except M915A2 and M916A1

Reference

Condition Description

Tools and Special Equipment:

Transmission Tunnel

Access Cover Removed

Shop Equipment, SC 4910-95-CL-A72

Tool Kit, SC 5180-90-CL-N26

General Safety Instructions:

Materials/Parts:

Nut, Lock

WARNING

Diesel fuel is flammable. Do not work on fuel

Compound, Pipe

system in presence of sparks or open flame.

Sealing

in presence of sparks or open flame.

To do so could result In serious injury to

References:

personnel.

TM 9-2320-363-10

REMOVAL

WARNING

Diesel fuel is flammable Do not work on fuel system in presence of sparks or open

flame. To do so could result in serious injury to personnel.

NOTE

Have suitable container available to catch fuel remaining in fuel hoses.

DISCONNECT FUEL HOSE (1) FROM FUEL TANK ASSEMBLY (2)

REMOVE LOCK NUT (3), SCREW (4), WASHER (5), CLAMP (6), AND CLAMP (7) FROM TRANSMISSION

DIPSTICK TUBE (8). DISCARD LOCK NUT.

REMOVE FUEL HOSE (1) FROM CHECK VALVE (9).

CAUTION

Elbow is a special orifice and should be handled carefully. Failure to do so may

result in damage to equipment.

4-43.0 Change 3