 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
CYLINDER HEAD FUEL LINES AND FITTINGS REPLACEMENT (CONT)
REMOVAL
WARNING
Diesel fuel is flammable. Do not work on fuel system in presence of sparks or open
flame. To do so could result in serious injury to personnel.
NOTE
Have suitable container available to catch fuel remaining in fuel hoses.
1.
DISCONNECT FUEL HOSE (1) FROM FUEL TANK ASSEMBLY (2).
2.
REMOVE LOCK NUT (3), SCREW (4), WASHER (5), CLAMP (6), AND CLAMP (7) FROM TRANSMISSION
DIPSTICK TUBE (8). DISCARD LOCK NUT.
3.
REMOVE FUEL HOSE (1) FROM FUEL HOSE (9).
CAUTION
Elbow is a special orifice and should be handled carefully. Failure to do so may
result in damage to equipment.
4.
REMOVE FUEL HOSE (9) AND SPECIAL ELBOW (10) FROM CYLINDER HEAD (11).
5.
DISCONNECT FUEL HOSE (12) FROM ELBOW (13).
6.
REMOVE ELBOW (13) FROM CYLINDER HEAD (11).
7.
REMOVE SCREW (14) AND CLAMP (15) FROM ENGINE BLOCK (16).
8.
REMOVE FUEL HOSE (12) FROM FUEL FILTER ADAPTER ASSEMBLY (17).
CLEANING/INSPECTIONI
Clean and inspect all parts in accordance with Chapter 2.
INSTALLATION
WARNING
Diesel fuel is flammable. Do not work on fuel system in presence of sparks or open
flame. To do so could result in serious injury to personnel.
1.
INSTALL FUEL HOSE (12) ON FUEL FILTER ADAPTER ASSEMBLY (17).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals