Figure C-18. Idler Gear Holding Fixture

TM 9-2320-360-34-2

NOTE

Required stock:

Mild steel plate, 0.75 x 6.13 x 4 in. (19 x 156 x 102 mm)

Mild steel plate, 0.25 x 4 x 4 in. (6.35 x 102 x 102 mm)

Nut, 3/8-16 (MS51967-8)

Bolt, 3/8-16 x 3-1/4 (MS90725-71)

(1) Cut 0.75 x 2 x 2 in. (19 x 50.8 x 50.8 mm) steel plate.

(2) Drill 0.50 in. (12.7 mm) hole through center of steel plate.

(3) All dimensions are inches (millimeters).

(4)

Cut 0.75 x 4 x 4 in. (19 x 102 x 102 mm) steel plate.

(5)

Drill 1.50 in. (38.1 mm) hole through center of steel plate.

(6)

Drill 0.50 in. (12.7 mm) hole in steel plate.

(7)

All dimensions are inches (millimeters).

Figure C-18. Idler Gear Holding Fixture

C-12