Section III. MANUFACTURED ITEMS ILLUSTRATIONS
Fabricate from bulk hose stock listed in table C-1.
Using fine-toothed hacksaw, cut hose to length required in table C-1.
Clean debris from inside hose and around hose end.
Place fitting A in vise and screw hose counterclockwise unt il hose bottoms in fitting. Back off one quarter turn.
Place fitting B in vise and screw hose counterclockwise until hose bottoms. Back off one-quarter turn.
Figure C-1. Hose Assembly
Table C-1. Hose Assembly
C-2 Change 1