 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
WARNING
Wear eye protection and use care
when Installing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
Injury.
(17) Install new oil seal (18), backup plate (19),
and new retaining ring (20) in closed-end
bearing cover (21).
(18) Lightly coat mounting surface of PTO
housing (22) with grease.
WARNING
Adhesive-sealant may burn or give
off harmful vapors. It Is harmful to
skin and clothing. To avoid Injury or
death, keep away from open flame
and use In well-ventilated area. If
adhesive-sealant gets on skin or
clothing, wash Immediately with soap
and water.
(19) Coat threads of four screws (23) with
adhesive-sealant.
(20) Install new gasket (24), closed-end
bearing cover (21), and output shaft (3) on
PTO housing (22) with four screws (23).
Torque to 214-240 lb-in. (23-27.1 Nm).
(21) Install output shaft (3) on closed-end
bearing cover (21).
NOTE
Lip on seal faces bearing cover.
(22) Install new oil seal (25) in open-end
bearing cover (26) until flush with outside
surface.
28-69
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals