|
|
TM 9-2320-360-34-2
NOTE
Discs and plates should be installed
alternately starting with friction
plates.
(2) Install eight friction discs (4) and seven
clutch plates (5) on Inner clutch gear (6).
(3) Coat new preformed packing (7) with
lubricating oil.
NOTE
Lip on seal faces narrow edge on
piston.
(4) Install new preformed packing (7) on
clutch piston (8).
(5) Install clutch piston (8) in backup cylinder
(9).
(6) Position inner clutch gear (6), clutch
spring (10), and backup cylinder (9) on
output shaft (3).
(7) Position inner clutch gear (6) and backup
cylinder (9) in vise.
(8) Tighten vise to compress spring (10).
28-67
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |