(12) Remove four screws (20), closed-end
bearing cover (21), bearing cover gasket
(22), and output shaft (23) from PTO
housing (3). Discard gasket.
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
(13) Remove retaining ring (24) and backup
plate (25) from closed-end bearing cover
(21). Discard retaining ring.
(14) Remove oil seal (26) from closed-end
bearing cover (21). Discard oil seal.
(15) Press ball bearing (27) and thrust washer
(28) from output shaft (23).