Cleaning/Inspection -726030553

TM 9-2320-360-34-2

NOTE

Do steps (32 and 33) only if bearings

or bushings fail inspection.

(32) Remove two bronze bearings (54) from drum

(49).

(33) Remove bronze bushing (55) from end cover

(26).

(34) Remove screw (56), lockwasher (57), and cable

hook (58) from end support (17).

Discard

lockwasher.

b. Cleaning/Inspection

WARNING

Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and

gloves and use only in a well-ventilated area. Avoid contact with skin, eyes, and

clothes, and don't breathe vapors. Do not use near open flame or excessive heat.

The flash point is 100-138 F (38-59 C). If you become dizzy while using cleaning

solvent, get fresh air immediately and get medical aid. If contact with eyes is

made, wash your eyes with water and get medical aid immediately.

(1) Clean metal parts with dry cleaning solvent.

28-53