Assembly (Cont.) -726030545

TM 9-2320-360-34-2

(8) Coat six new pocket seals (8) thoroughly with

grease.

(9) Install pocket seals (8) in thrust plate (9).

(10) Install thrust plate (9) in gear housing (10).

(11) Install driven gear (11) and gear (12) in housing

(10).

(12) Install key (13) into driven gear (11).

(13) Install new gasket seal (14) in groove in gear

housing (10).

NOTE

Marks made during disassembly

should be aligned before assembly.

(14) Install gear housing (10), over gears (11 and

12), on shaft end cover (2).

(15) Install new gasket seal (15) in groove in gear

housing (10).

(16) Install two new ring seals (16) and four bearings

(17) in bearing carrier (18).

(17) Coat six new pocket seals (19) thoroughly with

grease.

(18) Install pocket seals (19) in thrust plate (20).

(19) Install thrust plate (20) in bearing carrier (18).

(20) Install bearing carrier (18) on gear housing (10).

28-45