Retaining ring is held captive inside
(36) Expand retaining ring (51) enough to
disengage planetary carrier (52) from end
of output shaft (53).
approximately 100 lb (45 kg). Keep
out from under planetary carrier.
Failure to comply may result in
serious injury or death to personnel.
(37) Remove planetary carrier (52) from end of
output shaft (53) with aid of assistant.
Outer brake housing is under 3500 lb
(1589 kg) of spring pressure. Loosen
six screws slowly and evenly until
spring force is relieved. Failure to
comply may result in serious injury
Steps (38) thru (66) are performed on
motor end of winch.
(38) Remove six screws (54), lockwashers (55)
and brake housing (11) from brake
adapter (56). Discard lockwashers.
(39) Remove 12 compression springs (57)
from brake adapter (56).
(39.1) Remove drain cap (57.1), nut (57.2), and
hose (57.3) from side support (5).
(39.2) Remove hose (57.3) from elbow (57.4).
Change 1 28-7