 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
NOTE
Tension on cable must be released
if clutch drive gear is stuck on
input shaft.
Do steps (19) thru (21) if clutch
drive gear is stuck on input shaft.
(19) Remove pin (33) from pin (34).
(20) Remove pin (34) from cable clevis (35).
(21) Remove cable clevis (35) from cable
clamp (36).
(22) Remove two plugs (37) and vent (38) from
planetary adapter cover (32).
(23) Remove piston (39) with clutch drive gear
(29) from clutch adapter (22).
(24) Remove two preformed packings (40) and
preformed packing (41) from piston (39).
Discard preformed packings.
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(25) Remove retaining ring (42) from clutch
drive gear (29). Discard retaining ring.
(26) Remove piston (39) from clutch drive gear
(29).
(27) Remove two tube fittings (43) from clutch
adapter (22).
Change 1 28-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals