 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
28-2. WINCH REPAIR (CONT)
WARNING
Clutch end cover is under spring
pressure. Loosen nuts slowly and
evenly until spring brace is relieved.
Failure to do so may cause Injury to
personnel.
(11) Loosen two nuts (23) on threaded rods
(21) and remove clutch end cover (20)
from clutch adapter (22).
(12) Remove two nuts (23) and clutch end
cover (20) from two threaded rods (21).
(13) Remove two threaded rods (21) from
clutch adapter (22).
(14) Remove preformed packing (24) from
clutch end cover (20). Discard preformed
packing.
(15) Remove spring (25) from clutch adapter
(22).
NOTE
Bearing may stay on shaft or in
clutch end cover.
(16) Remove bearing (26) from shaft (27).
(17) Remove thrust ring (28) from clutch drive
gear (29).
WARNING
Clutch drive gear and piston may
separate from clutch adapter causing
injury to personnel.
NOTE
Location of air fittings on clutch
adapter should be marked on
planetary adapter cover before
removal.
(18) Remove six screws (30), lockwashers
(31), and clutch adapter (22) from
planetary adapter cover (32).
Discard
28-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals