Disassembly -726030485

TM 9-2320-360-34-2

27-5. TEE GEAR BOX REPAIR (CONT)

(5) Remove tour screws (10), front output end plate

(11), gasket (12), and output shaft (2) from

housing (5). Discard gasket

(6) Remove front output end plate (11) from output

shaft (2).

(7) Remove four screws (13), rear output end plate

(14), and gasket (15) from housing (5). Discard

gasket

(8) Remove oil seal (16) from front output end plate

(11). Discard oil seal.

(9) Position front output end plate (11) in vise

outside surface up.

NOTE

Bearing cups and cones are matched

sets. They should be kept together.

(10) Remove bearing cup (17) from front output end

plate (11).

(11) Remove front output end plate (11) from vise.

27-42