 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
27-4. REAR STEERING GEAR REPAIR (CONT)
WARNING
Timing marks on piston and pinion
must be properly aligned. Failure to
comply will cause steering gear to
fall and loss of vehicle control which
may cause serious Injury or death to
personnel.
(17) Center timing mark (16) on pinion gear (12)
between timing marks (17) on piston (11) and
install output shaft (13) in housing (2).
NOTE
Do step (18) if bearing was
removed during disassembly.
Bearing must be pressed in until
flush with face of cover.
(18) Install bearing (18) in cover (19).
(19) Lubricate new preformed packing (20) with
hydraulic oil and install on cover (19).
(20) Install cover (19) on housing (2) with eight new
lockwashers (21) and screws (22). Tighten to
170-180 lb-ft (231-244 N m)
27-38
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals