Disassembly -726030467

TM 9-2320-360-34-2

27-3. FRONT STEERING GEAR REPAIR (CONT).

(8) Remove paint/foreign matter from output shaft

(13) with crocus cloth.

(9)

Using a soft-faced hammer, tap end of output

shaft (13) to loosen cover (12).

(10) Remove cover (12) and preformed packing (14)

from housing (1). Discard preformed packing.

NOTE

Do step

(11) if bearing

fails

inspection.

(11)

Remove bearing (15) from cover (12).

(12) Remove output shaft (13)} and pinion gear (16)

from housing (1).

NOTE

Do not separate pinion gear from

output shaft unless one of them

must be replaced.

Do steps (13) thru (15) if replacing

pinion gear or shaft.

(13) Remove roll pin (17) from pinion gear (16).

Discard roll pin.

(14) Using 3/8 in. (9.5 mm) bit, drill retaining pin (18)

from pinion gear (16) and output shaft (13).

(15) Remove pinion gear (16) from output shaft (13).

27-24