 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
27-2.1. AUXILIARY STEERING PUMP REPAIR (CONT)
(2) Remove five screws (7), valve block (6),
and gasket (8) from pump housing (9).
Discard gasket.
(3) Remove wafer plate (10) and piston (11)
from valve block (6).
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(4) Remove retaining ring (12) and rod (13)
from valve block (6).
NOTE
Do step (5) if valve fails inspection.
(5) Remove seat (14), valve (15), and spring
(16) from valve block (6).
(6) Remove two pins (17) from valve block
(6).
(7) Remove plug (18) and preformed packing
(19) from valve block (6).
Discard
preformed packing.
(8) Remove plug (20) and preformed packing
(21) from valve block (6).
Discard
preformed packing.
(9) Position valve block (6) in soft jawed vice.
NOTE
When removing bearing, frequently
reposition slide hammer hook.
(10) Remove bearing (22) from valve block (6).
27-22.2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals