Rear Housing Assembly (Cont.) -726030454

TM 9-2320-360-34-2

(23) Install cylinder block (33) on shaft (10).

(24) Install bearing spacer (43) and bearing

(44) on shaft (10).

(25) Install orifice plug (45) in adapter (46) with

new retaining ring (47).

(26) Install two new preformed packings (48)

and plugs (49) on adapter (46).

(27) Install new preformed packing (50) and

fitting (51) on adapter (46).

(28) Install new preformed packing (52) and

adapter (46) on valve block (53).

(29) Install new preformed packing (54) and

plug (55) in valve block (53).

NOTE

Do step (30) if seat, valve, and

spring were removed.

When properly installed, seat

should be flush with face of valve

block.

(30) Install spring (56), valve (57), and seat

(58) in valve block (53).

(31) Install bearing cup (59) in valve block (53).

(32) Install new preformed packing (60) and

rod (61) in valve block (53).

(33) Install new retaining ring (62) on rod (61).

(34) Install piston (63), pin (64), and wafer

plate (65) on valve block (53).

27-21