Front Housing Assembly (Cont.) -726030448

TM 9-2320-360-34-2

NOTE

Pin retainer must be installed 0.25 in.

(6.4 mm) below surface.

(18) Install pin retainer (34) in cylinder block

(29).

NOTE

Pins must be installed in cylinder

block until they bottom against

spring washer.

(19) Install three pins (35) in cylinder block

(29).

(20) Position spherical washer (36) on top of

three pins (35).

(21) Install shoe plate (37) with nine pistons

(38) over spherical washer (36) and into

cylinder block (29).

(22) Install cylinder block (29) on shaft (6), (23)

Install bearing spacer (39) and bearing

(40) on shaft (6).

(24) Install orifice plug (41) in adapter (42) with

new retaining ring (43).

(25) Install two new preformed packings (44)

and plugs (45) on adapter (42).

(26) Install new preformed packing (46) and

fitting (47) on adapter (42).

(27) Install new preformed packing (48) and

adapter (42) on valve block (49).

27-15