 |
|||
|
|
|||
|
Page Title:
Front Housing Disassembly (Cont.) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
27-2. STEERING PUMP REPAIR (CONT)
(7) Remove wafer plate (16), pin (17), and
piston (18) from valve block (2).
(8) Remove rod (19) and preformed packing
(20) from valve block (2).
Discard
preformed packing.
NOTE
Do step (9) if valve fails inspection.
(9) Remove seat (21), valve (22), and spring
(23) from valve block (2).
(10) Position valve bl ock (2) in soft-jawed vise.
(11) Remove bearing cup (24) from valve block
(2).
(12) Remove plug (25) and preformed packing
(26) from valve block (2).
Discard
preformed packing.
(13) Remove fitting (27) and preformed
packing (28) from adapter (29). Discard
preformed packing.
(14) Remove two plugs (30) and preformed
packings (31) from adapter (29). Discard
preformed packings.
(15) Remove adapter (29) and preformed
packing (32) from valve block (2). Discard
preformed packing.
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(16) Remove retaining ring (33) from adapter
(29).
(17) Remove orifice plug (34) from ad apter
(29).
27-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals