(70) Press bearing (59) in output housing (60).
(71) Press shaft (61) on bearing (59).
(72) Measure distance C between machine
surface of output housing (60) and top of
(73) Measure distance D between machine
surface and bottom of first land in cover
(74) Calculate shim thickness (62) by
subtracting distance C from distance D.
Shim thickness = DC.
On direct contact, uncured silicone
sealant Irritates eyes.
In case of
contact, flush eyes with water and
seek medical attention. In case of
skin contact, wipe off and flush with
(75) Coat mating surface of cover (58) with
(76) Install shim (62) and cover (58) and on