 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(22) Install two taper bearings (23) on
differential (24).
(23) Coat taper bearings (23) with lubricating
oil.
(24) Position rear housing (3) so pinion shaft
(10) points down.
NOTE
Do step (25) if dowels were removed.
(25) Install four dowels (25) on rear housing
(3).
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well ventilated
area. If adhesive sealant gets on skin
or clothing, wash immediately with
soap and water.
(26) Coat threads of four screws (26) with
adhesive-sealant (Item 4, Appendix B).
NOTE
If pinion gear shims were increased
in thickness, differential bearings
must be decreased by same amount.
If pinion gear shims were decreased
in thickness, differential bearings
must be increased by same amount.
(27) Install differential (24), bearing caps (27),
shim (28), and races (29) on rear housing
(3) with four screws (26). Torque to 25 lb-
in. (2.8 Nm).
(28) Position adjusting nut (30) in rear housing
(3).
25-47
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals