 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(105) Coat mating surface of front housing cover
(72) with adhesive-sealant (Item 4,
(106) Coat threads of six screws (73) and two
screws (73.1) with adhesive-sealant (Item
6, Appendix B).
(107) Install front housing cover (72) and
manifold bracket (74) on front housing
(56) with six screws (73) and two screws
(73.1). Torque to 46 lb-ft (62 Nm).
(108) Install bearing (75) in front housing cover
(72).
(109) Coat bearing (75) with lubricating oil.
(110) Coat seal cage nut (76) with adhesive-
sealant (Item 6, Appendix B).
(111) Install seal cage nut (76) in front housing
cover (72). Torque to 217-253 lb-ft (294-
343 Nm).
NOTE
Oil seal is installed properly when top
surface of seal is 1/16 in. (1.59 mm)
below housing.
(112) Install new oil seal (77) in front housing
cover (72).
(113) Install new preformed packing (78) on
piston pin (79).
(114) Install piston pin (79) in cover (80).
(115) Install fitting (81) in cover (80).
Change 1 25-29
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals