 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
25-2. AXLE NO. 2 DIFFERENTIAL REPAIR
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Oil drained from differential assembly
Wrench Set, Socket, 3/8 In. Drive (Item 232,
(LO 9-2320-360-12).
Axle manifold removed (TM 9-2320-360-20).
Wrench, Torque, 600 Lb-Ft (Item 233,
Brake chambers removed
(TM 9-2320-360-20).
Wrench, Torque, 150 Lb-In. (Item 234,
Axle shafts removed (para 10-8).
Wrench, Torque, 0-300 Lb-In. (Item 235,
Tools and Special Tools
Tool Kit, Genl Mech (Item 202, Appendix E)
Wrench, Tor que, 0-175 Lb-Ft (Item 236,
Blocks, Wooden (Figure C-3, Appendix C)
Extractor, Jet (Figure C-11, Appendix C)
Holder, Yoke (Figure C-15, Appendix C)
Materials/Parts
Gage, Preload, Differential Carrier
Adhesive-Sealant, Silicone (Item 2,
Installer, Bearing Cone (Figure C-20,
Adhesive-Sealant (Item 3, Appendix B)
Adhesive-Sealant (Item 4, Appendix B)
Adapter, Differential Maintenance
Adhesive-Sealant (Item 6, Appendix B)
(Item 0.1, Appendix E)
Cloth, Crocus (Item 16, Appendix B)
Caliper Set, Micrometer (Item 15, Appendix E)
Compound, Sealing, Pipe Thread
Crowbar (Item 30, Appendix E)
(Item 28, Appendix B)
Dial Indicator, Magnetic (Item 32,
Dye, Prussian Blue (Item 30, Appendix B)
Grease, Ball Bearing (Item 33, Appendix B)
Goggles, Industrial (Item 57, Appendix E)
Oil, Lubricating (Item 48, Appendix B)
Multiplier, Torque (Item 99, Appendix E)
Rags (Item 51, Appendix B)
Press, Hydraulic (Item 116, Appendix E)
Solvent, Dry Cleaning (Item 54, Appendix B)
Puller Kit, Mechanical, Gear and Brg
Tags, Identification (Item 56, Appendix B)
(Item 124, Appendix E)
Locknuts (14) (Item 82, Appendix F)
Remover/Setter, Stud (Item 137, Appendix E)
Locknuts (5) (Item 96, Appendix F)
Sling, Endless Strap (Item 161, Appendix E)
Nuts (2) (Item 149, Appendix F)
Socket, 63 mm (Item 163.2, Appendix E)
Nut (Item 146, Appendix F)
Socket, Sockethead Screw, 10 mm
Packings, Preformed (Item 166, Appe ndix F)
(Item 175, Appendix E)
Packing, Preformed (Item 174, Appendix F)
Socket, Spanner (Item 176, Appendix E)
Seals, Oil (2) (Item 305, Appendix F)
Socket, Spanner (Item 177, Appendix E)
Socket, Spanner (Item 178, Appendix E)
Personnel Required
Stand, Engine (Item 181, Appendix E)
Two
Stand, Maintenance, Automotive Axle
(Item 182, Appendix E)
Wrench Set, Socket, 1 In. Drive (Item 230,
Wrench Set, Socket, 3/4 In. Drive (item 231,
25-2 Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals