 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
23-2. TRANSFER CASE REPAIR (CONT)
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and Is
harmful to skin and clothing. To
avoid Injury or death, keep away from
open fire and use In well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash Immediately with
soap and water.
(91) Coat area in and around lower opening
(88) with adhesive-sealant (Item 3,
(92) Coat threads of screws (89) with
adhesive-sealant (Item 6, Appendix B).
(93) Install bearing cap (14) on transfer case
front half (86) with new lockwashers (90)
and screws (89). Torque to 60 lb-ft (81
Nm).
(94) Install bearing races (91 and 92) in
transfer case front half (86).
(95) Coat mating surfaces of upper end cap
(93) and end cap (94) with adhesive-
sealant (Item 3, Appendix B).
(96) Coat threads of screws (95) with
adhesive-sealant (Item 6, Appendix B).
(97) Install upper end cap (93) on transfer case
front half (86) with six new lockwashers
(96) and screws (95). Torque to 60 lb-ft
(81 Nm).
NOTE
Seal is installed with numbered side
up.
(98) Install new seal (97) in upper end cap
(93).
(99) Coat threads of screws (98) with
adhesive-sealant (Item 6, Appendix B).
(100) Install end cap (94) on transfer case front
half (86) with six new lockwashers (99)
and screws (98). Torque to 60 Ib-ft (81
Nm).
23-28
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals