Turn transfer case front hal f (19) up.
Remove 20 screws (50) from transfer
case front half (19).
Install two screws (50) in transfer case
rear half jackscrew holes (51) next to
Tighten two screws (50) alternately to
force transfer case front half (19) with
dowels (52) from rear half (2).
Transfer case front half weighs 200 lb
(91 kg). Stay clear of transfer case
front half when supported by lifting
device. Transfer case front half may
fall and cause serious injury to
Attach three straps (4) to transfer case
front half (19).
Lift transfer case front half straight
up to prevent possible damage to
Lift transfer case front half (19) from rear
half (2) while assistant operates suitable
lifting device. Place on flat surface.
Remove two screws (50) from transfer
case rear half (2).