 |
|||
|
|
|||
|
Page Title:
PLANETARY GEARING, SHAFTS, AND THIRD CLUTCH REPAIR (CONT) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
22-16. PLANETARY GEARING, SHAFTS, AND THIRD CLUTCH REPAIR (CONT)
WARNING
Wear eye protection and use care
when Installing snap rings. Snap
rings are under spring tension and
can act as projectiles when released
causing severe eye Injury.
NOTE
Do steps (4) thru (16) only if end play
is not within specifications.
(4) Remove snap ring (7) from rear carrier
assembly (1).
(5) Remove spring pin (8) from rear carrier
assembly (1).
(6) Place rear carrier assembly (1) in press
with splined hub down.
NOTE
Balls may fall when pressing
spindles.
Catch balls to prevent
losing them.
(7) Press four spindles (9) with locking balls
(10) from rear carrier assembly (1) using
soft drift.
(8) Remove four pinions (2), washers (11),
and washers (12) from rear carrier
assembly (1).
(9) Remove four bearings (13) and bearings
(14) from pinions (2).
(10) Remove snap ring (15) from rear carrier
assembly (1).
(11) Remove spring pin (16) from rear carrier
assembly (1).
(12) Turn rear carrier assembly (1) over in
press.
(13) Press four spindles (17) with locking balls
(18) from rear carrier assembly (1) using
soft drift.
(14) Remove four pinions (3) and eight
washers (19) from rear carrier assembly
(1).
(15) Remove four bearings (20) from pinions
(3).
(16) Remove re ar carrier assembly (1) from
press.
22-88
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals