 |
|||
|
|
|||
|
Page Title:
MAIN CONTROL VALVE REPAIR (CONT) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(5) Hold oil transfer plate (3) and separator
plate (4) together and remove from control
valve body (5).
CAUTION
Ensure transfer plate and separator
plate do not separate before turning
over.
(6) Turn oil transfer plate (3) and separator
plate (4) over with separator plate up.
Place on flat work surface.
CAUTION
Ensure transfer plate is face up on
work surface before separator plate
is removed. Failure to do so will
allow check balls to fall from control
valve.
(7) Lift separator plate (4) from oil transfer
plate (3).
CAUTION
Do not drop selector valve. Tip may
break off and valve will become
unserviceable.
(8) Remove selector valve (11) from control
valve body (5).
CAUTION
Record and identify check balls by
size, color, and location. Failure to
comply may result in equipment
damage.
(9) Remove four 1/4 in. check balls (12) from
oil transfer plate (3).
(10) Remove 3/8 in. check ball ( 3) and 5/16
1
in. check ball (14) from oil transfer plate
(3).
(11) Remove retaining pin (15) from check
valve pin (16) while assistant presses
down on cup washer (17).
(12) Remove cup washer (17), spring (18), and
lubrication check valve (19) from oil
transfer plate (3).
22-65
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals