FORWARD CLUTCH AND TURBINE SHAFT REPAIR (CONT) -726030222

TM 9-2320-360-34-2

WARNING

Wear eye protection and use care

when removing retaining rings.

Retaining rings are under spring

tension and can act as projectiles

when released causing severe eye

injury.

(27)

Compress spring retainer (20) with clutch spring

compressor tool (21) and hydraulic press. Install

retaining ring (22).

(28) Release pressure from spring retainer (20) and

remove clutch spring compressor tool (21).

NOTE

Install bearing race with cupped side

down.

(29) Install outer race (23) on small hub of forward

clutch assembly (3).

(30) Install thrust bearing (24) on outer race (23).

(31) Coat inner race (25) with lubricating oil and

install on thrust bearing (24).

(32) Soak five friction plates (26) in clean lubricating

oil for 2 minutes.

(33) Install forwa rd clutch driving hub (27) on forward

clutch assembly (3).

(34) Install five steel plates (28) and five friction

plates (26), starting with steel plate (28) and

alternating with friction plate (26).

(35) Install fifth clutch driving hub (13) on forward

clutch assembly (3).

(36) Install large inner retaining ring (29) on forward

clutch assembly (3).

(37) Remove forward clutch assembly (3) from press.

22-45