TORQUE CONVERTER HOUSING/FRONT SUPPORT REPAIR (CONT) -726030210

TM 9-2320-360-34-2

(29) Check clearance between backplate (38), drive

gear (37), and two driven gears (35) using feeler

gages (40). Maximum clearance is 0.006 in.

(0.15 mm). If clearance is more than 0.006 in.

(0.15 mm),replace oil pump.

(30) Turn oil pump (33) over.

(31) Coat rubber lip of new seal (41) with lubricating

oil and install seal in pump (33).

(32) Coat new outer seal ring (42) with lubricating oil

and install on backplate (38).

(33) Turn torque converter housing (5) on side with

aid of assistant.

(34) Install oil pump (33) on torque converter housing

(5) while assistant holds torque converter

housing (5).

(35) Align screw holes in oil pump (33) with holes on

front support (10).

(36) Install six screws (43) in front support (10) and

oil pump (33) with aid of assistant.

22-33