TORQUE CONVERTER HOUSING/FRONT SUPPORT REPAIR (CONT) -726030203

TM 9-2320-360-34-2

22-7. TORQUE CONVERTER HOUSING/FRONT SUPPORT REPAIR (CONT)

(4)

Remove outer seal ring (6) from backplate

(7). Discard seal ring.

(5)

Remove screw (8) and backplate (7) from

oil pump (5).

(6)

Remove drive gear (9) from oil pump (5).

(7)

Remove two driven gears (10) from oil

pump shafts (11).

NOTE

Do step (8) only if bearings are

damaged.

(8)

Remove bearings (12) from driven gears

(10).

(9)

Set oil pump (5) on rim and remove oil

seal (13). Discard seal.

(10)

Remove three plugs (14) from oil pump

(5).

(11)

Remove elbow (15) from torque converter

housing (1).

WARNING

Wear eye protection and use care

when removing retaining rings.

Retaining rings are under spring

tension and can act as projectiles

when released causing severe eye

injury.

NOTE

Tag and mark all parts.

(12)

Slowly remove retaining ring (16)

while

assistant pushes support assembly

(17).

Discard retaining ring.

(13)

Remove support assembly (17),

valve

seat (18), converter bypass valve

(19),

and spring (20).

22-26