 |
|||
|
|
|||
|
Page Title:
TORQUE CONVERTER HOUSING/FRONT SUPPORT REPAIR (cont.) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(3)
Remove
seven
screws
(5)
and
lockwashers (6) holding torque converter
housing (2) to transmission housing (7).
Discard lockwashers.
(4)
Install two lifting eyes (8) on torque
converter housing (2).
(5)
Install lifting device to lifting eyes (8).
CAUTION
Do step (6) before removing torque
converter housing.
Pitot collector
will be damaged if step (6) is not
performed.
(6)
Remove two screws (1) and washers (9)
from torque converter housing (2).
(7)
Remove torque converter housing (2)
while assistant operates lifting device.
(8)
Remove bearing race (10), roller bearing
(11), and bearing race (12).
(9)
Remove
pitot
collector
(13)
from
transmission housing (7).
b.
Disassembly
(1) Turn torque converter housing (1) over
and place on wooden blocks with aid of
assistant.
(2) Remove two seal rings (2) from support
hub (3). Discard seal rings.
CAUTION
When screws are removed, oil pump
will fall.
Ensure that assistant
supports oil pump to prevent
damage.
(3)
Remove six screws (4) and oil pump (5)
from torque converter housing (1) while
assistant supports oil pump.
22-25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals