CRANKSHAFT COVER, FRONT OIL SEAL, AND OIL PUMP REPAIR (Cont.) -726030141

TM 9-2320-360-34-2

19-14. CRANKSHAFT COVER, FRONT OIL SEAL, AND OIL PUMP REPAIR (CONT)

(11) Install trunnion (29) on crankshaft cover

(6) with four new lockwashers (30),

screws (31), two new lockwashers (32),

screws (33), two new lockwashers (34)

and screws (35).

(12) Tighten screws (33 and 35) to 30-35 Ib-ft

(41-47 Nm).

(13) Tighten screws (31) to 70-75 Ib-ft (94-102

Nm).

(14) Coat ring (36) with light coat of grease.

Slide over trunnion (29).

(15) Install top half of support (37) on support

(38) with two new lockwashers (39) and

screws (40). Torque to 45-50 Ib-ft (61-67

Nm).

f. Follow-On Maintenance

(1) Install oil pan (para 3-20).

(1.1) Install crankshaft vibration damper (para

3-14).

(2) Install crankshaft pulley (para 3-12).

(3) Install 24-volt (front) alternator adjusting

strap (TM 9-2320-360-20).

(4) Install fan clutch (TM 9-2320-360-20).

(5) Install fan belts (TM 9-2320-360-20).

(6) Install fan (TM 9-2320-360-20).

(7) Remove engine from engine stand (para

(8) Install air box covers (para 3-8).

(9) Install air box drains (para 3-9).

(10) Install exhaust manifolds (para 3-23).

(11) Install 24-volt (front)

(TM 9-2320-360-20).

(12) Install

150

amp

circuit

breakers

(TM 9-2320-360-20).

(13) Install starter (TM 9-2320-360-20).

(14) Install sending units and attachments

(TM 9-2320-360-20).

19-126 Change 3