CAMSHAFT AND END BEARING REPAIR (Cont.) -726030128

TM 9-2320-360-34-2

f. Follow-On Maintenance (Cont)

(7) Install engine brake retarders (para 3-26).

(8) Install engine brake retarder wire harnesses (para 6-16).

(9) Install blower accessory drive hub (para 4-9).

(10) Install water pump drive gear (para 3-24).

(11) Install vibration damper and front cover (para 3-15).

(12) Install water pump (para 5-5).

(13) Install secondary fuel filter housing (para 4-13).

(14) Install right thermostat housing (para 5-4).

(15) Install left thermostat housing (para 5-3).

(16) Adjust valve clearance, engine brake retarder, and fuel injector timing (para 3-27).

(17) Install 12-volt (rear) alternator/bracket (TM 9-2320-360-20).

(18) Install fuel injector wire harnesses (para 4-3).

(19) Install rocker covers (TM 9-2320-360-20).

(20) Install DDEC oil pressure sensor (TM 9-2320-360-20).

(21) Install thermostats (TM 9-2320-360-20).

(22) Install electronic control module (ECM) (TM 9-2320-360-20).

(23) Install fan clutch (TM 9-2320-360-20).

(24) Install fan belts (TM 9-2320-360-20).

(25) Install fan (TM 9-2320-360-20).

(26) Remove engine from engine stand (para 19-3).

(27) Install air box covers (para 3-8).

(28) Install air box drains (para 3-9).

(29) Install exhaust manifolds (para 3-23).

(30) Install 24-volt (front) alternator/bracket (TM 9-2320-360-20).

(31) Install 150 amp circuit breakers (TM 9-2320-360-20).

(32) Install starter (TM 9-2320-360-20).

(33) Install sending units and attachments (TM 9-2320-360-20).

19-113