ENGINE BLOCK REPAIR (CONT) -726030036

TM 9-2320-360-34-2

d. Testing

(1) Coat two new seal rings (1) with lubricating oil.

(2) Install two new seal rings (1) in grooves (2) of

each cylinder of engine block (3).

(3) Install cylinder insert (4) into each cylinder

recess.

NOTE

It may be necessary to seat liners in

engine block with soft-faced mallet.

(4) Install eight cylinder liners (5) In engine block

(3).

(5) Install eight new compression gaskets (6) in

cylinders (7).

(6) Install 2 new oil hole seals (8) and 32 water hole

seals (9) in 34 counterbored holes (10) In each

side of engine block (3).

(7) Install four shims (11) one at each end of

cylinder head contact surface of each side of

engine block (3).

(8) Install gasket (12) and water inlet cover plate

(13) on right side front of engine block (3) with

two lockwashers (14), screws (15), and nuts

(16).

19-21