 |
|||
|
|
|||
|
Page Title:
ENGINE BLOCK REPAIR (CONT) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
19-4. ENGINE BLOCK REPAIR (CONT)
INITIAL SETUP (CONT)
Tools and Special Tools (Cont)
Materials/Parts (Cont)
Wrench Set, Socket, 3/4 In. Drive (Item 231,
Compound, Sealing and Lubricating (Item 27,
Wrench, Torque, ,0-600 Lb-Ft (Item 233,
Compound, Sealing, Pipe Thread (Item 28,
Wrench, Torque, 0-300 Lb-in. (Item 235,
Oil, Lubricating (Item 45, Appendix B)
Gaskets (8) (Item 27, Appendix F)
Wrench, Torque, 0-175 Lb-Ft (Item 236,
Gasket (Item 34, Appendix F)
Gasket (Item 38, Appendix F)
Wrench, Torque, 0-75 Lb-in. (Item 237,
Gasket (Item 48, Appendix F)
Lockwashers (2) (Item 127, Appendix F)
Seal Rings (34) (item 258, Appendix F)
Seal Rings (16) (Item 271, Appendix F)
Materials/Parts
Antifreeze, Permanent (Item 12, Appendix B)
Shims, Head (4) (Item 322, Appendix F)
Compound, International, No. 2 (Item 21,
a. Disassembly
WARNING
Engine has may sharp edges. Use
caution when using hand tools.
Failure to comply may result In Injury
to personnel.
(1) Install lifting device on engine block (1).
WARNING
Engine weighs 2605 lb (1182 kg).
Stand
clear
of
engine
when
supported by lifting device. Engine
may fall and cause serious Injury or
death to personnel.
(2) Support
engine
block
(1)
with
lifting
device.
(3) Remove six screws (2), washers (3), and
engine block (1) from engine stand (4).
(4) Place engine block (1) on floor.
(5) Remove lifting device from engine block
(1).
(6) Remove 13 screws (5) and adapter plate
(6) from engine block (1).
19-9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals