 |
|||
|
|
|||
|
Page Title:
ENGINE TO ENGINE STAND INSTALLATION/REMOVAL (CONT) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(14) Install hose no. 2682 (14) on elbow (11).
NOTE
Plastic
cable
ties
should
be
positioned in
locations marked
during removal.
(15) Install plastic cable tie (15) on hose no.
2682 (14) and hose no. 2761 (16).
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and Is harmful to skin and
clothing. To avoid Injury or death,
keep away from open fire and use In
well-ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash Immediately with soap
and water.
(16) Coat threads of adapter (17) with pipe
thread sealing compound.
(17) Install adapter (17) on engine assembly
(1).
(18) Install hose no.
2761 (16) on adapter
(17).
(19) Install plastic cable tie (15) on hose no.
2630 (13) and engine wire harness (18).
(20) Install ether start temperature sensor (19)
on engine assembly (1) with new
lockwasher (20) and screw (21).
(21) Install electrical connector
(22)
on
electrical connector (23).
c. Follow-On Maintenance
(1) Install air box covers (para 3-8).
(2) Install air box drains (para 3-9).
(4) Install 24-volt (front)
alternator/brac ket
(TM 9-2320-360-20).
(5) Install 150 amp circuit breakers (TM 9-
2320-360-20).
(6) Install starter (TM 9-2320-360-20).
(7) Install sending units and attachments (TM
9-2320-360-20).
19-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals