|
| |
TM 9-2320-360-34-1
6-15.1. DDEC III WIRE HARNESS REPLACEMENT (CONT)
b.
Installation
NOTE
Evenly
distribute
any
slack
in
harness.
Do
not
make
any
connections.
(1)
Position DDEC III wire harness (1) on
engine (2).
(2)
Install electrical connector (3) on oil
pressure sender (4).
(3)
Install DDEC III wire harness (1) in clip (5)
and close clips.
6-192.4 Change 3
|
