|
| |
TM 9-2320-360-34-1
(8)
Install 3 covers (13) on electronic
control box (14) with 19 screws
(15).
NOTE
Plastic
cable
ties
should
be
positioned
in
locations
marked
during removal.
(9)
Secure DDEC wire harness (1)
with plastic cable ties (4).
(10)
Install three cushion clips (16) on
bottom
of
cab
with
new
lockwashers (17), washers (18),
and screws (19).
c.
Follow-On Maintenance
(1)
Install stowage box (TM 9-2320-360-20).
(2)
Install front engine access panels (TM 9-2320-360-20).
(3)
Install lower engine access panel (TM 9-2320-360-20).
(4)
Connect batteries (TM 9-2320-360-20).
(5)
Close engine hood (TM 9-2320-360-10).
Change 3 6-139
|
