|
| |
TM 9-2320-360-34-1
6-4. STARTER REPAIR (CONT)
(30)
Remove oil seal (73) from shift housing
(59).
NOTE
Do step (31) only if bushing fails
inspection.
(31)
Remove bushing (74) from shift housing
(59).
(32)
Remove screw (75) from shift housing
(59).
(33)
Remove armature (76) from field ring (15).
(34)
Remove thrust washer (77) from armature
shaft (34).
(35)
Remove paper insulator (78) from field
ring (15).
(36)
Push rubber boot (79) on solenoid (14)
back to expose plunger (80).
CAUTION
Plunger
must
be
wrapped
with
crocus cloth to protect plunger when
removing link spool in step (38)
Failure to comply may result in kinks
on
plunger
and
damage
to
equipment.
(37)
Wrap strip of crocus cloth twice around
plunger (80).
(38)
Remove link spool (81) and rubber boot
(79) from plunger (80) using adjustable
joint pliers to hold plunger (80).
6-34
|
