|
| |
TM 9-2320-360-34-1
5-6. FAN CLUTCH REPAIR
This task covers
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Fan clutch removed (TM 9-2320-360-20).
Adhesive-Sealant, Silicone (Item 2, Appendix B)
Compound, Sealing, Lubricating (Item 27,
Tools and Specials Tools
Appendix B)
Tool Kit, Genl Mech (Item 202, Appendix E)
Compound, Sealing, Pipe Thread (Item 28,
Tool Kit, Fan Clutch Overhaul (Item 203,
Appendix B)
Appendix E)
Grease, Automotive and Artillery (Item 32,
Blocks, Wooden (Figure C-3, Appendix C)
Appendix B)
Caps, Vise Jaw (Item 17, Appendix E)
Oil, Lubricating (Item 45, Appendix B)
Compressor Unit, Air (Item 24, Appendix E)
Solvent, Dry Cleaning (Item 54, Appendix B)
Gage, Feeler (Item 50, Appendix E)
Ring, Retaining (Item 235, Appendix F)
Goggles, Industrial (Item 57, Appendix E)
Ring, Retaining (Item 236, Appendix F)
Pliers, Retaining Ring (Item 109, Appendix E)
Ring, Retaining (Item 237, Appendix F)
Pliers, Retaining Ring (Item 111, Appendix E)
Overhaul Kit (Item 155, Appendix F)
Press, Hydraulic (Item 116, Appendix E)
Packing, Preformed (Item 175, Appendix F)
Puller Kit, Mechanical, Gear and Brg
(Item 124, Appendix E)
Socket, Sockethead, Screw, 3/16 In. (Item 172,
Appendix E)
Vise, Machinists (Item 207, Appendix E)
Wrench, Torque, 0-175 Lb-Ft (Item 236,
Appendix E)
Wrench, Torque, 0-300 Lb-In. (Item 235,
Appendix E)
NOTE
All tool numbers referred to in
procedure are used in Tool Kit, Fan
Clutch Overhaul.
a.
Disassembly
(1)
Remove eight screws (1) and bearing
retainer (2) from fan pulley (3).
(2)
Remove preformed packing (4) from
bearing retainer (2). Discard preformed
packing.
5-24
|
